Acheron 2.0 Menu
Fast Track What's New in Acheron 2.0 Introduction to Fractals Overview of Acheron 2.0 Fractals Curves in Acheron 2.0 Von Koch Curve Mandelbrot Curve Hilbert Curve Cesaro Curve Heighway Curve Construction Properties Variations Author Biography Minkowski Curve Peano Curve Square Curve Sierpinski Curve Sierpinski Objects
Feedback about Acheron 2.0 Download Counters of Acheron 2.0 Support of Acheron 2.0 Safe Use of Acheron 2.0
Visitors Counter
10406 visitors (since Jan 2010)





All pictures are from Acheron 2.0,
a free explorer of geometrical fractals. You can download Acheron 2.0
here 
Acheron 2.0 Screen Overview

The american physicist John Heighway discovered this curve while working at
NASA. The Heighway curve, also called the Heighway Dragon or HarterHeighway Dragon, was popularized in 1967
when Martin Gardner described it in American Scientific. Three years later, the first mathematical analysis
was published by Chandler Davis and Donald Knuth. Although the construction of this curve is
quite simple, its fascinating properties have stimulate a lot of works in different fields of mathematics.

Construction
While three methods were described for the construction of the Dragon
curve, the discussion will be limited to the method used originally by
Heighway.
To construct the curve, imagine that you take a trip of paper. Fold it in
two equal parts by taking the right edge and adjusting it above the left edge
of the trip. Repeat this operation two or three times and then unravel the paper
trip so that each corner makes a right angle in the natural direction of the
fold. Looking at the paper trip from the edge will reveal the Heighway curve.
Here are the result of the first five foldings:
Note that the software strips slightly the folding corners to avoid
touches between folders.
Increasing the number of folding leads to more and more complex drawing
and, finally, to the limiting shape, the Dragon Curve.
There are two types of folding: the folding of type 1 consists of ajusting
the right edge above the left edge of the paper. The folding of type 0
is the inverse operation, as you adjust the right edge below the left
one.
Mixing folding types changes dramatically the look of the curve:
Folding 11111111 ( 8 foldings of type 1)
Folding 10101010 ( 8 foldings alternatively of type 1 and 0)
Folding 11100111 ( 6 foldings type 1 with 2 of type 0 in the middle)
Playing around with the folding sequence may lead to very peculiar drawings ...
Properties Back to Top
 Curve Order
This property derives from the construction method: a curve of order n is
the combination of two curves of order n  1.
As an example, the following picture shows:
 on the left, a curve obtained by using the folding sequence 111111
 on the right, two instances of a curve obtained with a 11111 sequence, one
of them being rotated to be in the correct alignment.
 Fractal Dimension
The fractal dimension is computed using the
HausdorffBesicovitch equation:
D = log (N) / log ( r)
The selfsimilarity N and r values are derived from the construction of
the curve using the triangle method.
D = log(2) / log(2*sqr(2)) = 2
Variations Back to Top
All Variations described are available using Acheron 2.0
 Folding Sequence
The folding sequence is entered as a string of 1 and 0, up to 16 characters.
Author Biography Back to Top




